[cisco-voip] Unity out call notification

Lelio Fulgenzi lelio at uoguelph.ca
Wed Sep 30 12:00:54 EDT 2009


Here's what my restriction table looks like. 

Things to look at: 

    • maximum length of dial string 
    • the order is important, i.e. your allow is before the block 
    • your entry doesn't have a check mark in the block column 
    • i don't think you can have two "*" rules, but I could be wrong 

I know that there is a few bugs with ordering in v7.0, so you might be better off restarting from scratch. 

Other than that, it might mean a call to the TAC. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Edward Countryman" <Edward.Countryman at provena.org> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, September 30, 2009 11:43:09 AM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] Unity out call notification 




Even with the * in the table I cannot enter an 11 digit number preceded by a 9. I tried both the * and the 9??????????? But unity returns the same error “ Phone number does not fit dialing rules or your dialing permissions” 



Is there a setting somewhere that has to be changed to allow this type of out calling other the COS and restriction table? 





From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, September 30, 2009 10:17 AM 
To: Countryman, Edward 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] Unity out call notification 




You'll definitely want to change that....* allows anything. 

the format is a valid number and/or ? 

so, 9??????????? would allow a 9 followed by 11 digits. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Edward Countryman" <Edward.Countryman at provena.org> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, September 30, 2009 11:05:01 AM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] Unity out call notification 


This is the first and only out call application from Unity 



Do you know how the restriction table should be formatted to allow a 12 digit dial (i.e. 91xxxyyynnnn ) 



Presently I have * which the doc says is a wild card 





From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, September 30, 2009 10:03 AM 
To: Countryman, Edward 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] Unity out call notification 




The class of service assigned to the user refers to particular restriction tables that dictate what numbers you can add. You will have to follow your dial plan rules, e.g. add a 9 and make sure your voice mail ports can dial out. 

Be careful though, giving your voice mail ports LD access can be considered a potential toll fraud vulnerability. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Edward Countryman" <Edward.Countryman at provena.org> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, September 30, 2009 10:58:50 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Unity out call notification 



I have an application where the user wants to be called on her Cell whenever a message is left in a particular mail box. Although I have unity calling extensions for other notifications Unity won’t let me enter the external number to call. I created a separate dialing restriction table and a separate COS for this application but unity continues to tell me “Phone number does not fit dialing rules or your dialing permissions” and will not let me even enter the number into the notification device page. We are unity 7.0 

Anyone know what I am missing to make this work?? 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090930/9a7f81a4/attachment.html>


More information about the cisco-voip mailing list