[cisco-voip] Restoring 4.1(3)sr5d Publisher?

[Dane]

I don't think changing the vlan alone would always be the best way.
Correct me if I am wrong but if you have routed vlans (is that the
right term?) your IP to IP communication between pub and sub could
still work.  Unless the method for the sub checking to see if the pub
is back online is broadcast based then changing the vlan isn't enough.
 The point I believe is to ensure that the sub see the pub is back
online before the pub is completely restored with all the correct data
right.  If it does and the pub isn't 100% restored then data from the
pub could get pushed to the sub?

I might be way off.



On Wed, Sep 30, 2009 at 1:08 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> so, changing the VLAN on the switch is good enough?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Wes Sisk" <wsisk at cisco.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Dane" <dane at pktloss.net>, cisco-voip at puck.nether.net
> Sent: Wednesday, September 30, 2009 1:35:00 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] Restoring 4.1(3)sr5d Publisher?
>
> If TAC engineer is not familiar then yes, please do escalate. It is still
> supported and this knowledge is still available to help you.
>
> Otherwise -
> it is good to install and upgrade the publisher offline.  It is not good to
> take the publisher offline by simply unplugging the network cable. That
> takes down the IP interface and causes numerous problems with installs and
> upgrades.
>
> /Wes
>
> On Wednesday, September 30, 2009 11:40:55 AM, Lelio Fulgenzi
> <lelio at uoguelph.ca> wrote:
>
> Your process is what I would do. Get it running to the version you have now
> offline and then once you have restored everything from backup shut down the
> publisher, plug it in and then restart it. once it is restarted, you will
> have to restart the TFTP server and other subscribers.
>
> Hopefully you don't have to republish the databases. But if you do, you can
> use the dbhelper tool to do that.
>
> Hopefully others will help.
>
> P.S. If your TAC engineer is not familiar with 4.1, then I would ask to have
> the case escalated to someone who has 4.1 experience.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Dane" <dane at pktloss.net>
> To: cisco-voip at puck.nether.net
> Sent: Wednesday, September 30, 2009 11:21:46 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Restoring 4.1(3)sr5d Publisher?
>
> We had a drive fail on our publisher and had someone swap it out last
> night.  Well it seems they made a couple of mistakes and left me no
> option but having to rebuild and restore now.
>
> Were running 4.1(3)sr5d and have a current BARS backup.
>
> Problem is all the media we have is some what old so I am having to
> install and upgrade and upgrade and upgrade to get back to where we
> were.
>
> My concern centers around the fact that this is the publisher that is
> down and having to be rebuilt using older media and then upgrading to
> get back to the point we were.  Is there a risk in corrupting or
> interrupting the subscriber that is currently operational and running
> everything?  I am afraid of the publisher coming back online too early
> during the process and somehow overwriting information on the
> subscriber before the publisher is fully built.
>
> My TAC engineer isn't familiar with the 4.1 release and windows side
> of things.  Currently the plan he suggests based on the media we have
> available is to install 4.0.2 (from media) offline (unplug cable),
> then upgrade it to 4.1(3), then upgrade to 4.1(3)sr5d, then install
> BARS from that version of CM and do the restore of the BARS backup
> data.
>
> Does this sound right to others?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>