[cisco-voip] SIP gateway on cisco 2620 with NM-2v

[Arne Larsen / Region Nordjylland]

Hi all.


I'm having problems with a 2620 and a NM-2V card.
I'm trying to set it up as a SIP gateway between an Asterisk and 2 Bri ISDN's.
I can't make call's out off the box, but I can make calls from the PSTN world.
If  I debug the call setup on layer3 of the ISDN I can see that I returns a error code. Cause i = 0x82E404 - Invalid information element contents.
This releases the call.
Has anyone this working and if how ??  /Arne


Here is a debug .

Call from outside  to inside ok
 
 Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x89
        Calling Party Number i = 0x2183, '72137586'
                Plan:ISDN, Type:National
        Called Party Number i = 0xA1, '98188935'
                Plan:ISDN, Type:National .Apr  1 18:11:39.591: ISDN BR1/0 Q931: TX -> CALL_PROC pd = 8  callref = 0xB5
        Channel ID i = 0x89
.Apr  1 18:11:40.239: ISDN BR1/0 Q931: TX -> ALERTING pd = 8  callref = 0xB5 .Apr  1 18:11:42.767: ISDN BR1/0 Q931: TX -> PROGRESS pd = 8  callref = 0xB5
        Progress Ind i = 0x8188 - In-band info or appropriate now available .Apr  1 18:11:42.795: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 0x18
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x82
        Calling Party Number i = 0x2183, '72137586'
                Plan:ISDN, Type:National
        Called Party Number i = 0xA1, '98188935'
                Plan:ISDN, Type:National
        Sending Complete
       
        ---------------------------------------------
        
        Call from inside to outside not ok 
        
        
        .Apr  1 18:22:41.827: %LINK-3-UPDOWN: Interface BRI1/0, changed state to up
	.Apr  1 18:22:42.107: ISDN BR1/0 Q921: User TX -> IDREQ ri=38651 ai=127
	.Apr  1 18:22:42.131: ISDN BR1/0 Q921: User RX <- IDASSN ri=38651 ai=91
	.Apr  1 18:22:42.135: ISDN BR1/0 Q921: User TX -> SABMEp sapi=0 tei=91
	.Apr  1 18:22:42.147: ISDN BR1/0 Q921: User RX <- UAf sapi=0 tei=91
	.Apr  1 18:22:42.147: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 91 changed to up
	.Apr  1 18:22:42.151: ISDN BR1/0 Q921: User TX -> INFO sapi=0 tei=91, ns=0 nr=0
	.Apr  1 18:22:42.155: ISDN BR1/0 Q931: SETUP pd = 8  callref = 0x1A
	        Bearer Capability i = 0x8090A2
	                Standard = CCITT
	                Transfer Capability = Speech
	                Transfer Mode = Circuit
	                Transfer Rate = 64 kbit/s
	        Channel ID i = 0x81
	        Calling Party Number i = 0x0080, '98188935'
	                Plan:Unknown, Type:Unknown
	        Called Party Number i = 0x80, '72137586'
	                Plan:Unknown, Type:Unknown
	.Apr  1 18:22:42.187: ISDN BR1/0 Q921: User RX <- RR sapi=0 tei=91 nr=1
	.Apr  1 18:22:42.343: ISDN BR1/0 Q921: User RX <- INFO sapi=0 tei=91, ns=0 nr=1
	.Apr  1 18:22:42.347: ISDN BR1/0 Q931: RELEASE_COMP pd = 8  callref = 0x9A
	        Cause i = 0x82E404 - Invalid information element contents
	.Apr  1 18:22:42.347: ISDN BR1/0 Q921: User TX -> RR sapi=0 tei=91 nr=1
	.Apr  1 18:22:43.739: ISDN BR1/1 Q931: L3_ShutDown: Shutting down ISDN Layer 3
	.Apr  1 18:22:52.347: ISDN BR1/0 Q921: User TX -> RRp sapi=0 tei=91 nr=1 .Apr  1 18:22:52.359: ISDN BR1/0 Q921: User RX <- RRf sapi=0 tei=91 nr=1