[cisco-voip] Enable g.729 on cucm conference bridge.

[Mauro Celli]

Hi,
i need to make conference with three or more ip phone in g.729.
With ios hardware conference bridge it work,but i would want to use the software conference bridge in cucm 6.1 (to save pvdm :P ).

>From cisco site,i read:

Note: Software conference devices only support G.711 codecs. Cisco CallManager 4.0 and later also support G.729 codecs. Still, the default codec is G.711

But if i make a conference with g.729,it fail (g.711 work correctly).
How I can resolve? Where I can modify the default codec?
Thanks


Cordiali saluti
Mauro Celli (work in progress...)
Site: www.2000net.it
13011 Borgosesia (VC) Italy
Via XXV Aprile,41
Tel.   0163.209111
Fax.  0163 .209301
Supporto tecnico: 0163 .209561
Email: mauro.celli at 2000net.it