[cisco-voip] 1941 Router

[Ratko Dodevski]

But can I use 1941 as a branch router for VoIP? The idea is to use
1941 with one PRI to connect some PBX witch will use SIP to the
operator.

can I do that?



On Mon, Apr 5, 2010 at 3:40 PM, Nick Matthews <matthnick at gmail.com> wrote:
> Correct.
>
> On Sat, Apr 3, 2010 at 12:12 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>> Hi guys, can someone confirm me that the lowest router from the ISR2
>> series that supports VoIP is 2901? As far as I can see 1941 does not
>> have a support for either DSP modules or voice interface cards.
>>
>> Thanks
>>
>> --
>> Ratko
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>



-- 
Ratko