[cisco-voip] hi.................

[Pavan]

Vipin,
You don't seem to have an outgoing translation profile in your  
BAngalore location. How are you adding the prefix there?

Sent from my phone

On Apr 8, 2010, at 4:00 AM, VIPIN DAS K <vipindas_2002 at hotmail.com>  
wrote:

> hi,
> i have facing a problem in Cisco CME. we  have implimented CME s at  
> two locations in india. and i am dialing from loction 1 to the  
> location the dialiling no will displays. But when  i am calling from  
> location 2 to location 1 only the extension is showing not the  
> complete no including the prefix. any body can help me in this  
> scenario...
>
> location 1 dial-peer
>
> dial-peer voice 8 voip
>  translation-profile outgoing Delhi-to-Bangalore
>  destination-pattern 80...
>  session protocol sipv2
>  session target ipv4:172.16.0.1
>  dtmf-relay sip-notify
>  no vad
>
>  loation 2 dial-peer
>
> dial-peer voice 4 voip
>  corlist outgoing call-local
>  destination-pattern 466766..
>  session protocol sipv2
>  session target ipv4:172.168.34.11
>  dtmf-relay sip-notify
>  no vad
> vipin
>
> cisco-voip at puck.nether.net
>
> The latest auto launches and test drives Drag n' drop
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100408/15d94cc1/attachment.html>