[cisco-voip] MOH cuts out

[Ryan Ratliff]

I recall seeing this before with a corrupted file on the router's flash.  If that's the case then you can just delete the file and re-copy it to flash to try and fix it.

-Ryan

On Apr 9, 2010, at 9:18 AM, Brad Waldbauer wrote:

> Greetings.
> 
> Anyone experience MOH on a remote router that cuts out during play back?  I have the system set up for remote MOH from the router and when calls get placed on hold, the MOH is choppy.  New 2921 router with only 1 3560 switch.  I've tried replacing the .au file thinking it might be corrupt.
> 
> 
> 
> 
> Bradley Waldbauer
> VoIP Systems Engineer
> 
> 303.918.4479 - cell
> • 720.279.5789 Direct
> Ê 303-799-3733 Fax
> @ 866-622-6722 Support
> š brad at isccorp.net<mailto:brad at isccorp.net> Email
> þ www.isccorp.net<http://www.isccorp.net/> Website
> 
> 
> 
> [cid:image001.png at 01CAC1DD.BC1CD5E0]
> 
> 
> Wyoming                    Colorado                                Utah
> 401 East E. Street                  8680 Concord Center Dr.                   2825 E. Cottonwood Pkwy Suite 500
> Casper, WY 82601                Englewood, CO 80112                        Salt Lake City, UT 84121
> 
> This email may contain material that is confidential and proprietary to ISC, Inc., and is for the sole use of the intended recipient.  Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited.  If you are not the intended recipient, please contact the sender and delete all copies.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip