[cisco-voip] 7.1.3 utils dbreplication status > sync target server is not defined for the replicate

[Ryan Ratliff]

Looks like you don't have a CDR connection for the other node, which is bad.

If you have CURT then the unified db status report is the way to go for checking replication.

Does a 'utils network connectivity' pass on the sub?
A 'show firewall list' on the pub should also indicate it has opened ports for the sub in the pub's firewall.  If this isn't there then clustermgr hasn't connected on the two and nothing will happen until that is working.

-Ryan

On Apr 12, 2010, at 1:29 PM, Jason Aarons (US) wrote:

> Hmmm, I have two nodes defined in CallManager. It was good. I shut them down for a week and relocated them.  Now second server isn’t showing. Trying a utils dbreplication repair all.
>  
>  
> Admin:utils dbreplication status
> admin:file view activelog cm/trace/dbl/sdi/ReplicationStatus.2010_04_12_14_28_47.out
>  
> SERVER                 ID STATE    STATUS     QUEUE  CONNECTION CHANGED
> -----------------------------------------------------------------------
> g_jv_cucm1_ccm7_1_3_20000_2    2 Active   Local           0
>  
> -------------------------------------------------
>  
>  
> No Errors or Mismatches found.
> Replication status is good on all available servers.
>  
> utils dbreplication status output
>  
> To determine if replication is suspect, look for the following:
>         (1) Number of rows in a table do not match on all nodes.
>         (2) Non-zero values occur in any of the other output columns for a table
>  
> Processing ccmdbtemplate_jv_cucm1_ccm7_1_3_20000_2_1_95_typedberrors with 991 rows group 1
> Sync target server is not defined for the replicate ccmdbtemplate_jv_cucm1_ccm7_1_3_20000_2_1_95_typedberrors
> command failed -- participants required for operation specified  (17)
>  
> end of the file reached
> options: q=quit, n=next, p=prev, b=begin, e=end (lines 1 - 19 of 19) :
>  
> Jason Aarons
> Consultant
> 904-338-3245 Mobile
> Dimension Data
>  
> 
> 
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/62e42fc6/attachment.html>