[cisco-voip] Caller ID from FXO

[Ryan Ratliff]

I was thinking it was a 7.1.5 feature but I was wrong...

http://cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_0_1/delta/cmadmin.html#wp1115153

-Ryan

On Apr 12, 2010, at 2:59 PM, Chris Ward (chrward) wrote:

> It does in 8.0! :-)
> 
> +Chris
> 
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
> (rratliff)
> Sent: Monday, April 12, 2010 2:59 PM
> To: David Zhars
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Caller ID from FXO
> 
> CUCM currently doesn't support caller id on FXO ports controlled by
> MGCP.  
> 
> Reference
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
> 9186a008009428e.shtml
> 
> -Ryan
> 
> On Apr 12, 2010, at 2:47 PM, David Zhars wrote:
> 
>> I have a 2801 router with a dual port FXO card.  In the first port is
> the telephone # for the building.   If this line is in use and someone
> calls the #, it rolls to a second phone #, a DID on our ISDN line.  The
> router is in MGCP mode.
>> 
>> When someone calls in, if they get that first # and the FXO port, we
> never get their caller ID.
>> If they should roll to the 2nd line (the DID) we always get the caller
> ID.
>> Since this is not an overly busy building, most times they get the
> POTS line in the FXO card and no Caller ID.
>> 
>> Anyway I can fix this?  Here's the config of the FXO port:
>> 
>> voice-port 0/0/0
>> echo-cancel coverage 48
>> timing hookflash-out 500
>> connection plar 2000
>> description XXX-YYY-ZZZZ
>> 
>> Thanks.
>> 
>> 
>> 
>> 
>> 
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip