[cisco-voip] 7925G Config?

[Brian Schultz]

Go to 7921G Software, then IP Phone Tools and Utilities, then 1.0.  Only
problem is that there doesn't seem to be a readme file or release notes on
how to actually use it.  When you launch it (didn't work with Win7, only XP
btw), it looks like you can set all the profile and network settings.  Not
quite sure what to do with it from here, but it looks promising...

Brian

On Tue, Apr 13, 2010 at 5:38 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>  Where is this utility?
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Brian Schultz" <bms314 at gmail.com>
> To: "Jason Aarons (US)" <jason.aarons at us.didata.com>
> Cc: cisco-voip at puck.nether.net
> Sent: Tuesday, April 13, 2010 5:08:08 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] 7925G Config?
>
>   Have you looked at the Bulk Deployment Utility with 1.3(4) firmware?  I
> haven't tried it yet, but hope to give it a whirl tomorrow.
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/firmware/1_3_4/english/release/notes/792x_134.html#wp240131
>
> 1.3(4) also adds interband roaming and full CCKM for WPA2/AES.
>
>
> Brian
>
> On Mon, Apr 12, 2010 at 4:04 PM, Jason Aarons (US) <
> jason.aarons at us.didata.com> wrote:
>
>>  I’m setting up a bunch of 7925Gs to Callmanager 7.1 and reading the
>> 7925G deployment guide.  Been awhile since I did some 7920/21s.
>>
>>
>>
>> For some reason I thought there was a new 32-bit application for use with
>> USB for configuring these (other than Avalanche SE).  I was hoping to export
>> the config and import via USB quickly as opposed to a https web page
>> import/export.
>>
>>
>>
>> Instead it appears the laptop USB driver enables https to the 7925G
>> (192.168.1.100). Which I guess is cool of your wireless profile isn’t setup.
>>
>>
>>
>> Tell me if I’m on the wrong track…
>>
>>
>>
>>
>>
>> ------------------------------
>>
>> *Disclaimer: This e-mail communication and any attachments may contain
>> confidential and privileged information and is for use by the designated
>> addressee(s) named above only. If you are not the intended addressee, you
>> are hereby notified that you have received this communication in error and
>> that any use or reproduction of this email or its contents is strictly
>> prohibited and may be unlawful. If you have received this communication in
>> error, please notify us immediately by replying to this message and deleting
>> it from your computer. Thank you. *
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100413/644f35b3/attachment.html>