[cisco-voip] How to send inbound call to multiple extensions

[Ashwani Ranpise]

Hello Experts,

I am very new to voip. I have CME running on Cisco 1760 router. I have
Vonage plugged into FXO port and 2 home phone on FXS port.
How to send inbound call from PSTN to both phone ( I have tried plar
command under FXO port but I am not understanding how to use RegEx to
mask my 4 digit extensions). Thanks for your help in advance.

FYI. Here is the configuration I have right now. It works with one
extension but I want both phones to ring at the same time for INBOUND
call.

CME-1760#sh run | s voice-port
voice-port 2/0
 input gain -6
 output attenuation -6
 echo-cancel coverage 32
 connection plar opx 1004 <<<<<<<<<<<<<<<<<
 description Connection to Vonage
 caller-id enable
voice-port 2/1
voice-port 3/0
 station-id name    xxxx
 station-id number 11111111111
 caller-id enable
voice-port 3/1
 station-id name yyyyy
 caller-id enable
CME-1760#
CME-1760#sh run | s dial-peer

dial-peer voice 1004 pots
 destination-pattern 1004
 port 3/0
dial-peer voice 1005 pots
 destination-pattern 1005
 port 3/1
dial-peer voice 100 pots
 destination-pattern 1[2-9]..[2-9]......
 incoming called-number .
 direct-inward-dial
 port 2/0
 forward-digits all
dial-peer voice 101 pots
 destination-pattern [2-9]..[2-9]......
 incoming called-number .
 direct-inward-dial
 port 2/0
 forward-digits all
dial-peer voice 102 pots
 destination-pattern 011T
 port 2/0
 forward-digits all
dial-peer voice 103 pots
 destination-pattern *123
 no digit-strip
 port 2/0
CME-1760#

Thanks,
Ashwani