[cisco-voip] 2951 with 64 FXS ports

[Lelio Fulgenzi]

EVM-HD-8FXS/DID + 2 x 8 FXS modules = 24 FXS 

you can do that twice, one in each NM/SM slot. So that gives you 48. 

4 VWICs = 4 x 4 FXS = 16 + 48 = 64 

Just an FYI though, you can probably by a four pack of VG224s cheaper than outfitting a router with FXS ports. You might want to price it out. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Ratko Dodevski" <rade239 at gmail.com> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, April 14, 2010 6:40:37 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] 2951 with 64 FXS ports 

Hi, according to 
https://www.cisco.com/en/US/products/ps10537/prod_series_comparison.html 
it says that 2951 support up to 64 FXS ports but i cant configure 
through the configuration tool. I need it with 48 FXS ports, but it 
seems like i can't put more then 32 (2 NM with 2x4FXS and 4x4FXS). 

-- 
Ratko 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100414/821cbbdf/attachment.html>