[cisco-voip] Ucm 7.1(3) slp_svr process

[Carter, Bill]

CPU utilization before utils snmp hardware-agents restart" = 65% 
CPU utilization after utils snmp hardware-agents restart" = 1%


-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Wednesday, April 14, 2010 5:12 PM
To: Carter, Bill
Cc: Cisco-Voip-Puck
Subject: Re: [cisco-voip] Ucm 7.1(3) slp_svr process

CSCte21646    slp_srvreg process causes high cpu utilization
was recently in the hot issues report.


/Wes

On Wednesday, April 14, 2010 5:28:19 PM, Carter, Bill 
<bcarter at sentinel.com> wrote:
> I have 2 7825-I callmanagers. From cli show status shows CPU idle at 
> about 45%. Through rtmt I see slp_svr process uses about 50% of the 
> CPU. I think slp_svr relates to IBM mgmt tools. Anyone else seen this?
>
> Sent from my iPhone
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip