[cisco-voip] Port Config: FXS to Paging

[David Zhars]

I can use 55, I'm not fussy!  But with the 2801 in H323 mode, how do I
instruct the VOIP network that when it sees 55 to route that call to port
0/2/0 on the 2801?  I can't see where in CCM I would do this.



On Thu, Apr 15, 2010 at 2:57 PM, Lee <ender9600 at gmail.com> wrote:

> Why not just use 55.
>
>
> dial-peer voice 55 pots
>  description Paging for Fire
>  port 0/2/0
>  destination-pattern 55
>  forward-digits 0
>
> On Thu, Apr 15, 2010 at 2:18 PM, David Zhars <dzhars at gmail.com> wrote:
>
>> OK, I'm going insane trying to figure out how to do this!
>>
>> I have a FXS port, I am going to attach it to a Bogen TAM-B for paging.
>> That part is pretty easy!
>> Configuring the port is proving much more difficult.  First, the router is
>> in H.323 mode.  How do I define the pattern I want users to dial (*55)?
>>
>> I have tried this:
>>
>> voice-port 0/2/0
>> !
>> dial-peer voice 55 pots
>>  description Paging for Fire
>>  port 0/2/0
>>  forward-digits all
>>
>>
>> I know I'm missing something!  (Prob a lot).
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100415/133b4d43/attachment.html>