[cisco-voip] Port Config: FXS to Paging

[Lee]

You set up route pattern for 55 & use Local RL for your h323 gw.

On Thu, Apr 15, 2010 at 3:00 PM, David Zhars <dzhars at gmail.com> wrote:

> I can use 55, I'm not fussy!  But with the 2801 in H323 mode, how do I
> instruct the VOIP network that when it sees 55 to route that call to port
> 0/2/0 on the 2801?  I can't see where in CCM I would do this.
>
>
>
> On Thu, Apr 15, 2010 at 2:57 PM, Lee <ender9600 at gmail.com> wrote:
>
>> Why not just use 55.
>>
>>
>> dial-peer voice 55 pots
>>  description Paging for Fire
>>  port 0/2/0
>>  destination-pattern 55
>>  forward-digits 0
>>
>> On Thu, Apr 15, 2010 at 2:18 PM, David Zhars <dzhars at gmail.com> wrote:
>>
>>> OK, I'm going insane trying to figure out how to do this!
>>>
>>> I have a FXS port, I am going to attach it to a Bogen TAM-B for paging.
>>> That part is pretty easy!
>>> Configuring the port is proving much more difficult.  First, the router
>>> is in H.323 mode.  How do I define the pattern I want users to dial (*55)?
>>>
>>> I have tried this:
>>>
>>> voice-port 0/2/0
>>> !
>>> dial-peer voice 55 pots
>>>  description Paging for Fire
>>>  port 0/2/0
>>>  forward-digits all
>>>
>>>
>>> I know I'm missing something!  (Prob a lot).
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100415/55939855/attachment.html>