[cisco-voip] G722 under MGCP PRI ?

[Nate VanMaren]

How new is your code?  Do you have it under the voice class?
CHQVG001(config)#voice class codec 1
CHQVG001(config-class)#codec preference 1 ?
  clear-channel  Clear Channel 64000 bps (No voice capabilities: data transport only)
  g711alaw       G.711 A Law 64000 bps
  g711ulaw       G.711 u Law 64000 bps
  g722-48        G722-48K 64000 bps - Only supported for H.320<->H.323 calls
  g722-56        G722-56K 64000 bps - Only supported for H.320<->H.323 calls
  g722-64        G722-64K 64000 bps - Only supported for H.320<->H.323 calls
  g723ar53       G.723.1 ANNEX-A 5300 bps (contains built-in vad that cannot be disabled)
  g723ar63       G.723.1 ANNEX-A 6300 bps (contains built-in vad that cannot be disabled)
  g723r53        G.723.1 5300 bps
  g723r63        G.723.1 6300 bps
  g726r16        G.726 16000 bps
  g726r24        G.726 24000 bps
  g726r32        G.726 32000 bps
  g728           G.728 16000 bps
  g729br8        G.729 ANNEX-B 8000 bps (contains built-in vad that cannot be disabled)
  g729r8         G.729 8000 bps
  ilbc           iLBC 13330 or 15200 bps

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Friday, April 16, 2010 8:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] G722 under MGCP PRI ?

My regions for this MGCP controlled PRI are for G.722.  Is there a way to enable G.722 on MGCP? All calls are going G.711 to gateway.

mgcp
mgcp call-agent 137.1.110.5 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0

JVRTR2(config)#mgcp codec ?
  clear-channel  Clear Channel 64000 bps, works with medium and high complexity
                 dsps
  g711alaw       G.711 A Law 64000 bps, works with all complexity dsps
  g711ulaw       G.711 u Law 64000 bps, works with all complexity dsps
  g723ar53       G.723.1 ANNEX-A 5300 bps, works with high complexity dsps
  g723ar63       G.723.1 ANNEX-A 6300 bps, works with high complexity dsps
  g723r53        G.723.1 5300 bps, works with high complexity dsps
  g723r63        G.723.1 6300 bps, works with high complexity dsps
  g726r16        G.726 16000 bps, works with medium and high complexity dsps
  g726r24        G.726 24000 bps, works with medium and high complexity dsps
  g726r32        G.726 32000 bps, works with medium and high complexity dsps
  g728           G.728 16000 bps, works with high complexity dsps
  g729ar8        G.729a 8000 bps, works with medium and high complexity dsps
  g729br8        G.729b 8000 bps, works with medium and high complexity dsps
  g729r8         G.729 8000 bps, works with medium and high complexity dsps
  gsmamr-nb      GSM AMR-NB 4750 - 12200 bps (contains built-in vad that cannot
                 be disabled)
  gsmfr          GSMFR 13200 bps, works with high complexity dsps
  ilbc           iLBC 13330 or 15200 bps

JVRTR2(config)#mgcp codec g722?
% Unrecognized command
JVRTR2(config)#mgcp codec g722?
% Unrecognized command
JVRTR2(config)#mgcp codec g722

Jason Aarons
Consultant
904-338-3245 Mobile
Dimension Data

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100416/a8360319/attachment.html>