[cisco-voip] How to send inbound call to multiple extensions
Nicholas Schilling
schillingn at gmail.com
Fri Apr 16 20:08:10 EDT 2010
even with that corrected same message.
1760V(config-voice-hunt-group)#final 5100
1760V(config-voice-hunt-group)#list 5110,5111,5112,5113,5114
Number 5110 is not a valid voice register dn. Re-enter 'list.'
On 4/16/2010 6:31 AM, Mike Thompson wrote:
> U have the DN configured as 5110 but 5510 in the list
>
> Sent from my phone, apologies for any typos.
>
> On Apr 15, 2010, at 10:08 PM, Nicholas Schilling <schillingn at gmail.com
> <mailto:schillingn at gmail.com>> wrote:
>
>> hello;
>>
>> when i try this i receive the following
>>
>> 1760V(config)#voice hunt-group 1 parallel
>> 1760V(config-voice-hunt-group)# final 5500
>> 1760V(config-voice-hunt-group)# list 5510,5511,5512,5513,5514
>> Number 5510 is not a valid voice register dn. Re-enter 'list.'
>>
>>
>> ephone-dn 10 dual-line
>> number 5110 no-reg primary
>> label test x5110
>> description 5510
>> name test
>> preference 5
>>
>>
>> thoughts?
>>
>>
>>
>> On 4/15/2010 12:53 PM, Ted Nugent wrote:
>>> Depending on your version of CME you can try something like the
>>> following
>>>
>>> voice hunt-group 1 parallel
>>> final 1200
>>> list 1210,1211,1212,1213
>>> timeout 12
>>> pilot 1201
>>>
>>>
>>> On Tue, Apr 13, 2010 at 11:15 PM, Ashwani Ranpise
>>> <ashwani at ranpise.com <mailto:ashwani at ranpise.com>> wrote:
>>>
>>> Hello Experts,
>>>
>>> I am very new to voip. I have CME running on Cisco 1760 router.
>>> I have
>>> Vonage plugged into FXO port and 2 home phone on FXS port.
>>> How to send inbound call from PSTN to both phone ( I have tried plar
>>> command under FXO port but I am not understanding how to use
>>> RegEx to
>>> mask my 4 digit extensions). Thanks for your help in advance.
>>>
>>> FYI. Here is the configuration I have right now. It works with one
>>> extension but I want both phones to ring at the same time for
>>> INBOUND
>>> call.
>>>
>>> CME-1760#sh run | s voice-port
>>> voice-port 2/0
>>> input gain -6
>>> output attenuation -6
>>> echo-cancel coverage 32
>>> connection plar opx 1004 <<<<<<<<<<<<<<<<<
>>> description Connection to Vonage
>>> caller-id enable
>>> voice-port 2/1
>>> voice-port 3/0
>>> station-id name xxxx
>>> station-id number 11111111111
>>> caller-id enable
>>> voice-port 3/1
>>> station-id name yyyyy
>>> caller-id enable
>>> CME-1760#
>>> CME-1760#sh run | s dial-peer
>>>
>>> dial-peer voice 1004 pots
>>> destination-pattern 1004
>>> port 3/0
>>> dial-peer voice 1005 pots
>>> destination-pattern 1005
>>> port 3/1
>>> dial-peer voice 100 pots
>>> destination-pattern 1[2-9]..[2-9]......
>>> incoming called-number .
>>> direct-inward-dial
>>> port 2/0
>>> forward-digits all
>>> dial-peer voice 101 pots
>>> destination-pattern [2-9]..[2-9]......
>>> incoming called-number .
>>> direct-inward-dial
>>> port 2/0
>>> forward-digits all
>>> dial-peer voice 102 pots
>>> destination-pattern 011T
>>> port 2/0
>>> forward-digits all
>>> dial-peer voice 103 pots
>>> destination-pattern *123
>>> no digit-strip
>>> port 2/0
>>> CME-1760#
>>>
>>> Thanks,
>>> Ashwani
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100416/2fbd3f91/attachment.html>
More information about the cisco-voip
mailing list