[cisco-voip] (no subject)

[polo person]

Greetings,
 
I have just subscribed to this list, and thought now is as good a time as any to make a posting.
 
Has anyone ever come across a problem with a Cisco display phone (either a 7911 or 7941) which continues to display that it has a “Call Forward – All Calls” set, but the call forward has actually been taken off by the telephone user?   i.e. Call Forward can be set and unset as much as you like but the display always remains the same, saying Call Forward is set.  However, calls are routed according to its actual setting, rather than what is displayed on the phone.
 
The only way to re-set the display is to unplug the phone from the network and plug it in again.
 
Interested to hear if anyone else has experienced this.
 
Thanks. 		 	   		  
_________________________________________________________________
http://clk.atdmt.com/UKM/go/195013117/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/54ac2d37/attachment.html>