[cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card

[Lelio Fulgenzi]

thanks! 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Bill" <bill at hitechconnection.net> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Friday, April 23, 2010 11:36:39 AM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card 




Yes you can do this. Both protocols act independent. You can’t configure SCCP and MGCP to control the same port but you could get crafty with H.323 but I wouldn’t. 






From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Friday, April 23, 2010 10:19 AM 
To: cisco-voip voyp list 
Subject: Re: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card 




I guess the most important question is this... 

If I have a 3945 with MGCP controlled ports, can I configure the same 3945 in CCM with SCCP controlled ports? 

So basically, I'll have my router listed twice in the gateways list? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Friday, April 23, 2010 11:15:08 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card 


OK, silly question, what MAC address do I use when configuring a VIC3-2FXS-E/DID with SCCP? 

Is it similar to a VG248 where I use the MAC address of fas0/0? 

So on a 3900, I would use the MAC address of GigabitEthernet0/0 ? 

I'll try that and see how it goes. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100423/db5280c5/attachment.html>