[cisco-voip] CAD QOS Settings

[Bill]

I am in a customer site where I don't think the LAN QOS is setup correctly
to trust the markings. I am in a pinch and setup some ACL's for the voice
and call control traffic and created a policy map inbound on the GIGE
interface to correctly mark the traffic. On the LAN side at HQ I can
reconfigure the port to trust the DSCP markings on the UCCX servers. My
question is what do I need to classify on the remote locations for CAD
traffic? The remote locations are complaining the CAD is unresponsive to
call events and disconnects but the voice and using the IP phone to transfer
works correctly. What traffic should I classify and mark at the branch
locations where CAD is used? 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100426/2d4bada8/attachment.html>