[cisco-voip] device type mismatch from call manager..

[Ed Leatherman]

All,

I'm getting a Device type mismatch syslog message about a specific
device, which seems straight forward enough - but when I go hunting
for the device in call manager to see what model it's configured as,
it doesn't find the device. Is this normal? I expected to find a 7962
that was configured as a 7961 by accident or something similar that I
could correct.
CM 7.1.5
  	
Aug  4 12:33:39 10.192.2.12 405102: Aug 04 16:33:39.265 UTC :
%CCM_CALLMANAGER-CALLMANAGER-3-DeviceTypeMismatch: Device type
mismatch. Name of device.:SEP0011211161EE Device type.:7 Database
device type:255 App ID:Cisco CallManager Cluster ID:OWP-PUB-Cluster
Node ID:owp-sub-a
Aug  4 12:33:39 10.192.2.12 405101: Aug 04 16:33:39.251 UTC :
%CCM_CALLMANAGER-CALLMANAGER-3-StationEventAlert: Station alert.
Protocol:SCCP TCP ProcessID:2.100.9.389509 Device Text:6:
Name=SEP0011211161EE Load=8.1(2.0)File Not Found Param1:2048
Param2:-113854710 App ID:Cisco CallManager Cluster ID:OWP-PUB-Cluster
Node ID:owp-sub-a
Aug  4 12:33:39 10.192.2.12 405848: : ccm: 405053: Aug 04 16:33:39.251
UTC :  %CCM_CALLMANAGER-CALLMANAGER-3-StationEventAlert: Station
alert. Protocol:SCCP TCP ProcessID:2.100.9.389509 Device Text:6:
Name=SEP0011211161EE Load=8.1(2.0)File Not Found Param1:2048
Param2:-113854710 App ID:Cisco CallManager Cluster ID:OWP-PUB-Cluster
Node ID:owp-sub-a

I ran a sql query both on the publisher and the subscriber that is
sending the error message, couldn't find anything in the device table
for this one:
admin:run sql select * from device where name="SEP0011211161EE"
It just returns an empty set. How can there be a device type mismatch
if there is nothing in the database for it?


-- 
Ed Leatherman