[cisco-voip] PRI Issues

[Monica Hardy]

No, just a basic MGCP router, nothing else.

I was just on the phone with TAC again. 

Looking through all of these debugs it looks like I only have the issue
when the call comes in and then back out the same gateway.  This is hard
to reproduce and I think I am just going to have to take a downtime and
be able to change everything and see what happens.

-Monica

-----Original Message-----
From: Robert Kulagowski [mailto:rkulagow at gmail.com] 
Sent: Wednesday, August 04, 2010 1:13 PM
To: Monica Hardy
Cc: cisco-voip
Subject: Re: [cisco-voip] PRI Issues

On Wed, Aug 4, 2010 at 1:48 PM, Monica Hardy <Monica.Hardy at openwave.com>
wrote:
>
> I failed to mention with the 91 put in front of the Calling Party
Number changes the plan
>
> to a Plan:ISDN, Type:National
>
>
>
> instead of a:
>
> Plan:Unknown, Type:Unknown
>
>
>
> I just don't see why and where that 91 is being added to the front of
the Calling Number.

Do you have a num-exp in your router configuration?