[cisco-voip] SIP in CCM 4

[James Avalos]

Yeah, I don't think it does endpoints.  Though I've been told that even though CM4.X  does allow SIP trunks, it doesn't do them well.  You'd need to be on 5.X at the least.
Though don't quote me on it, I'm only going based on the recommendation from a vendor who we use for the occasional pro services help....

-J


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, August 04, 2010 4:30 PM
To: Arnold Lesar
Cc: VoIPgroup
Subject: Re: [cisco-voip] SIP in CCM 4

a sip trunk is all I can think of.

ymmv

Scott
On Wed, Aug 4, 2010 at 3:38 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk<mailto:arnoldlesar at yahoo.co.uk>> wrote:
is it possible to use SIP protocol in CCM 4.2?

Regards,

Arnold Samuel Lesar

------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------

--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100804/7c9f36b0/attachment.html>