[cisco-voip] FW: CUCM 7.1(5) install on HP DL 380 G6 Failure

[Nate VanMaren]

In my experience the platforms are not flexible on memory either.

I remember having a 4gb ram and a single CPU and it failed because it said it couldn't find the 2nd CPU.  (7835/7845)

-Nate

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, August 06, 2010 9:18 AM
To: Andrew Gable
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FW: CUCM 7.1(5) install on HP DL 380 G6 Failure

I'd be very careful about adding extra stuff.  Memory I can see us being flexible about but the extra hard disk I could see either not being used when we configure the raid, or breaking things.

-Ryan

On Aug 6, 2010, at 10:58 AM, Andrew Gable wrote:



I know now where to turn to first.

Ryan: I order the complete bundle from HP only increasing the RAM and adding a third HD.

Scott: The P410i controllers only have 256meg and no Battery.

I'll get a battery backup ordered

Thanks all

From: Scott Voll [mailto:svoll.voip at gmail.com]
Sent: Thursday, August 05, 2010 7:36 PM
To: Andrew Gable
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] CUCM 7.1(5) install on HP DL 380 G6 Failure

Do you have the battery backup?  I had CM or CCx not install before I had it.

Scott


On Thu, Aug 5, 2010 at 1:21 PM, Andrew Gable <agable at jamestownbpu.com<mailto:agable at jamestownbpu.com>> wrote:
TAC is unable to assist me with this matter.

Using Cisco's matrices:


http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview09186a0080107d79.html

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

http://h20338.www2.hp.com/enterprise/us/en/partners/cisco-server-solutions.html


I purchased 4 DL 380 G6 (AX690A)

1

494329-B21

HP DL380G6 CTO Chassis

1

492136-L21

2.00Ghz Nehalem E5504 Processor FIO

4

500656-B21

HP 2GB 2Rx8 PC3-10600R-9 Kit

3

507125-B21

HP 146GB 10K 6G 2.5 SAS DP HDD




Install fails at:


- 7845H3: passed detection validation

DL380G6: BIOS UPDATE

DL380G6: BIOS SETUP

DL380G6: RAID UPDATE

DL380G6: RAID SETUP

Afterwards the installations stops with "Error: could not configure the default cache settings for" and the only option is to abort.











BIOS and all firmware is updated.



Tried install with all volumes deleted from raid.



What I'm I missing?





Thanks

Andrew


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100806/b9ef7f82/attachment.html>