[cisco-voip] 6941 second line same DN different pART does no work

Matthew Saskin msaskin at gmail.com
Mon Aug 9 11:40:00 EDT 2010


How is the call to 1890 in partition_1 going to get to 1890 in partition_2?
You need to set a call forward busy (or something else) to get the call to
appear on the 2nd line.

Matthew Saskin
msaskin at gmail.com
203-253-9571



On Mon, Aug 9, 2010 at 9:11 AM, gokhan senol <gokhanciscottl at yahoo.com>wrote:

> helo
>
> on cucm 7.1.3 i  The customer wanna see 2nd incoming call to his 6941 ip
> phone even the first line is busy..
>
> his phone first line Dn is 1890.
>
> I read the doc and found the recommended solution.
>
> For that reason i created different partition named 69xx_pt  and i assigned
> same DN (1890)and this new partition to the 2nd line of the phone.
>
> And I also  added this new partition to all CSS'    in cucm..
>
> but still I get busy signal when try 2nd call to the 1890 number.
>
>
>
> wht can be the issue. what should I check.
>
> thanks in advance
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100809/6f68847b/attachment.html>


More information about the cisco-voip mailing list