[cisco-voip] CUCM 7.1(5) install on HP DL 380 G6 Failure

Tue Aug 10 12:09:04 EDT 2010

Sounds like your 'VAR' is only an 'AR'...

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, August 10, 2010 12:01 PM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 7.1(5) install on HP DL 380 G6 Failure

Point taken.

and there's very little cost involved, but the VARs are the ones who miss the little Battery backup normally. ;-0

Scott
On Tue, Aug 10, 2010 at 8:53 AM, Wes Sisk <wsisk at cisco.com<mailto:wsisk at cisco.com>> wrote:
It blows me away the number of cases we get for corrupted filesystems from irate individuals who are using servers without UPS and without battery backed cache.

I understand it is a line item of cost.  However, it's not really saving cost, it's only moving money from hardware to service when failure happens.

/Wes

On Tuesday, August 10, 2010 11:16:53 AM, Scott Voll <svoll.voip at gmail.com><mailto:svoll.voip at gmail.com> wrote:
Blew me away that a stupid little internal battery backup would kill the install.

But glad it worked.

scott
On Tue, Aug 10, 2010 at 8:13 AM, Andrew Gable <agable at jamestownbpu.com<mailto:agable at jamestownbpu.com>> wrote:
Battery installed and software install is running.

Thanks guys

From: Scott Voll [mailto:svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>]
Sent: Thursday, August 05, 2010 7:36 PM
To: Andrew Gable
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

Subject: Re: [cisco-voip] CUCM 7.1(5) install on HP DL 380 G6 Failure

Do you have the battery backup?  I had CM or CCx not install before I had it.

Scott

On Thu, Aug 5, 2010 at 1:21 PM, Andrew Gable <agable at jamestownbpu.com<mailto:agable at jamestownbpu.com>> wrote:
TAC is unable to assist me with this matter.

Using Cisco's matrices:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview09186a0080107d79.html

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

http://h20338.www2.hp.com/enterprise/us/en/partners/cisco-server-solutions.html

I purchased 4 DL 380 G6 (AX690A)

1

494329-B21

HP DL380G6 CTO Chassis

1

492136-L21

2.00Ghz Nehalem E5504 Processor FIO

4

500656-B21

HP 2GB 2Rx8 PC3-10600R-9 Kit

3

507125-B21

HP 146GB 10K 6G 2.5 SAS DP HDD

Install fails at:

- 7845H3: passed detection validation

DL380G6: BIOS UPDATE

DL380G6: BIOS SETUP

DL380G6: RAID UPDATE

DL380G6: RAID SETUP

Afterwards the installations stops with "Error: could not configure the default cache settings for" and the only option is to abort.

BIOS and all firmware is updated.

Tried install with all volumes deleted from raid.

What I'm I missing?

Thanks

Andrew

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100810/27d749dd/attachment.html>