[cisco-voip] BAT Log -- Query

[Cheng, Karen]

I've noticed that myself.

I get around it by putting the query into the description field before I run the job. That way I know what I've run, when, what and who.

Maybe that will help you?

Karen Cheng
Voice Network Engineer


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Thursday, 12 August 2010 6:25 AM
To: Ryan Ratliff
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BAT Log -- Query

See attached.

it shows a reset was set,  It shows that the button template was changed.  Is shows how many phones were updated.

But it shows nothing for the actual Query.

make sense?

Scott
On Tue, Aug 10, 2010 at 6:31 PM, Ryan Ratliff <rratliff at cisco.com<mailto:rratliff at cisco.com>> wrote:
What do you mean by "anything for the query"?

-Ryan

On Aug 10, 2010, at 6:35 PM, Scott Voll wrote:

I've run a BAT update (phone update).  After it runs it leaves me a Log file.

Looking through the log it gives me what was updated, and the number of phones it was applied to.

It does not show anything for the query.  Is this a bug?  I can't find anything in the Bug toolkit?

CM version 7.1.5

TIA

Scott



Subscribe to Travel Deals http://www.racq.com.au/my_racq/subscriptions & receive the latest domestic & international offers direct to your inbox.
RACQ Travel 1300 096 166 travel at racq.com.au

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100812/dcb71fc5/attachment.html>