[cisco-voip] Tools to generate firmware reports

[Maciej Karpinski]

That report only shows phones that have firmware other that default 
firmware configured in phone configuration, It doesn't show what version 
is loaded on the phone.



On Thu, 12 Aug 2010, Lelio Fulgenzi wrote:

> The report I'm talking about is Device > Device Settings > Firmware Load Information . Is
> this the one you tried? I've never seen the output you mention below. But then again, I'm
> only running v4.1(3) and no 7925s yet.
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
> 
> 
> ____________________________________________________________________________________________________
> From: "Maciej Karpinski" <maciej.karpinski at consign.se>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: cisco-voip at puck.nether.net
> Sent: Thursday, August 12, 2010 8:25:42 AM
> Subject: Re: [cisco-voip] Tools to generate firmware reports
> 
> Unfortunetely that report doesn't work for phones that have an really old
> firmware and for wireless phones.
> 
> If the "Active Load ID" in UCM says Unknown the phone will not end up in
> the generated report. On 7921 and 7925 this field alwaus says "Unknown"
> and also on phones with to old firmware.
> 
> /M
> 
> On Thu, 12 Aug 2010, Maciej Karpinski wrote:
> 
> 
> 
> 
> On Thu, 12 Aug 2010, Lelio Fulgenzi wrote:
> 
> > There is a device report that tells you which phones are not using the
> > default firmware. Try that out.
> >
> > ?
> > Don't look at me, my iPod maid that spilling mistake.
> >
> > On 2010-08-12, at 6:42 AM, Maciej Karpinski <maciej.karpinski at consign.se>
> > wrote:
> >
> >> Hi
> >>
> >> I'm looking fore tools that can generate reports on what firmware phones in
> >> my network have. I have a unix script that can get such info from wired
> >> phones but it isn't able to get this info from 7921/7925 phones.
> >>
> >> Are there any tools that can do this? Would like to have something windows
> >> based so other people than me could generate the reports.
> >>
> >> Br.
> >> Maciej
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>