[cisco-voip] Use PC port on 7942 to sniff traffic

[Eric Butcher]

Yes.  In CUCM, there is a device specific config item on the phone called "span to pc port" I believe.  Enable that.


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
  317.569.4282 - IP Phone
  765.744.1458 - Mobile
  eric.butcher at cdw.com
http://www.cdw.com/
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Brander
Sent: Thursday, August 12, 2010 11:46 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Use PC port on 7942 to sniff traffic

Cisco VOIP Experts,

Do you know if it's possible to set up the PC port on a 7942 as a span port so that I can wireshark/sniff/tcpdump/etc. the phone traffic?

TIA,

Eric N. Brander
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip