[cisco-voip] 29xx routers and CCM 6.1?

[Wes Sisk]

CM also generates the config for router download. There is potential for 
difference in global config for the boxes in which case ccm-manager 
config would cause problems.  It may work as a short term workaround, 
but it's not scalable (read: likely to break in a future upgrade).

/Wes

On Thursday, August 12, 2010 4:58:23 PM, Nick Matthews 
<matthnick at gmail.com> wrote:
> So here's the thing with this, which I know isn't really documented 
> anywhere(assuming MGCP):
>
> Those pull downs for the routers and the cards are just for MGCP 
> endpoint formatting (to my knowledge, not a developer).
>
> The format of AALN/S0/SU1/0@/ fv/ is a mixup of the platform and the 
> cards so CUCM can put the slot and subslot in the correct format.
>
> In theory, if you just put in a 2800 in the same way you would a 2900, 
> I would expect this to work.  I can't think of any reasons on why CUCM 
> would keep a separate MGCP stack for each router.  If you look at some 
> of the older routers and cards there were not determinable, it 
> actually had you fill in the port/slots. 
>
> If you're talking SIP/H.323 the integration is so loose, I would not 
> even worry about the difference on the latest software.
>
> -nick
>
> On Thu, Aug 12, 2010 at 4:18 PM, Countryman, Edward 
> <Edward.Countryman at provena.org <mailto:Edward.Countryman at provena.org>> 
> wrote:
>
>     Here the response I received from TAC on this question:
>
>     "The 2900 series routers, being the newest release from Cisco, are not
>     supported on older versions of CallManager since you don't even
>     have the
>     option to add them. These routers are supported on CallManager version
>     7.1.3 and above
>     Since CUCM 6.X is now in its end of life stage, there will be no more
>     upgrades for the version, except for the engineering specials or any
>     necessary patches.
>     Related with the upgrade path, the recommended version would be CUCM
>     7.1.5.10000-12 since it's the latest version."
>
>     -----Original Message-----
>     From: cisco-voip-bounces at puck.nether.net
>     <mailto:cisco-voip-bounces at puck.nether.net>
>     [mailto:cisco-voip-bounces at puck.nether.net
>     <mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Countryman,
>     Edward
>     Sent: Thursday, August 12, 2010 1:27 PM
>     To: cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     Subject: [cisco-voip] 29xx routers and CCM 6.1?
>
>     Our networking has started to deploy 29xx routers in our
>     environment, I
>     noticed there are no options in my 6.1 call manager to configure
>     these.
>     Does anyone know if they are supported on 6.1 or can I just select the
>     equivalent 28xx version????
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100813/3638ba81/attachment.html>