[cisco-voip] SIP 7942 can't run dual-stack?

[Jason Aarons (US)]

What the reasoning around 79xx phones with SIP load don't support dual-stack?

Has to be SCCP? Wondering if the SIP loads don't do v6 or v4/v6 ?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/ipv6/ipv6inuc.html




-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100817/a5376c5d/attachment.html>