[cisco-voip] changing cluster name OK?

[Nate VanMaren]

I think you have to reboot all the nodes for it to actually happen…

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, August 19, 2010 2:12 PM
To: voyp list
Subject: [cisco-voip] changing cluster name OK?

Any issues with changing the cluster name?

I didn't see much objection according to this thread.

http://cisco-voip.markmail.org/message/xf37frrmbrduzed6?q=changing+cluster+name

It looks like it's as simple as changing the Enterprise Parameter > CDR Parameters > Cluster ID

Is this used for everything like RTMT and syslog entries?





---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100819/f2f415d3/attachment.html>