[cisco-voip] SRST Question
Matthew Loraditch
MLoraditch at heliontechnologies.com
Tue Aug 24 11:06:28 EDT 2010
You should be able to just setup dial peers to send the call types you want to the other router.
Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593
Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of steve.siltman at assurant.com
Sent: Tuesday, August 24, 2010 11:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SRST Question
Fun question I hope.
I have a location with 2 voice gateways. When the phones go into SRST mode, is it possible to dial out the 2nd voice gateway from a phone that is registered to the 1st voice gateway?
Thanks,
- Steve This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100824/867f19fe/attachment.html>
More information about the cisco-voip
mailing list