[cisco-voip] Need advice to unlock doors

[Matthew Loraditch]

I don't see how that would work if you had to do it during an active ip to ip phone call,. I could see a special door lock/phone device that ran off an fxs port possibly being able to do that while on a call.
Maybe a UCCX app could be setup where you set that phone to auto dial the app, it asks for the person you are trying to reach and records the person's name and then calls you and you say yes or no and then UCCX does some sort of call or http push or whatever  to your lock system?


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Sandy Lee
Sent: Wednesday, August 25, 2010 4:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Need advice to unlock doors

Hi,

I've been asked to integrate our CM 7.1(3) with an iStar Pro system which controls electric strikes on doors. They want to be able to unlock doors from an IP Phone. Let's say a visitor's at the front door for me, so he lifts the IP Phone right by the door and dials my number. Then, I input a code or a softkey or anything that will trigger a relay, which will unlock the door.

I absolutely don't know how to do this. Any advice will be greatly appreciated!
Regards.

Sandy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100825/2c63efd5/attachment.html>