[cisco-voip] Need advice to unlock doors

[Scott Voll]

I would suggest working with whom ever installed the iStar system.

we had a system and all they did was install an intercom that I connected to
a FXS port and a  simple press of 9 on the receiving phone opened the door.

for something like this, video would be very nice as you don't always know
who is out there.

we had ours set to dial any of our conference rooms as that is where people
were after hours.

YMMV

Scott

On Wed, Aug 25, 2010 at 1:01 PM, Sandy Lee <Sandy.Lee at dti.ulaval.ca> wrote:

>  Hi,
>
>
>
> I’ve been asked to integrate our CM 7.1(3) with an iStar Pro system which
> controls electric strikes on doors. They want to be able to unlock doors
> from an IP Phone. Let’s say a visitor’s at the front door for me, so he
> lifts the IP Phone right by the door and dials my number. Then, I input a
> code or a softkey or anything that will trigger a relay, which will unlock
> the door.
>
>
>
> I absolutely don’t know how to do this. Any advice will be greatly
> appreciated!
>
> Regards.
>
>
>
> Sandy.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100825/71b7d3ac/attachment.html>