[cisco-voip] BLF setup and Status of the Phone

[James Buchanan]

Make sure you set the SUBSCRIBE calling search space as well. 

 

James Buchanan | Senior Network Engineer | South Region | Presidio
Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
<mailto:jbuchanan at ctiusa.com> 
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com
<http://www.presidio.com> 

CCIE #25863, Voice



 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Thursday, August 26, 2010 8:51 AM
To: Saboor Khan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BLF setup and Status of the Phone

 

It's just a matter of enabling the line button template with and
assigning the BLF to a line that would be on the expansion module.  It
is really no different than assigning a BLF to one of the lines on the
phone itself.

 

-Ryan

 

On Aug 26, 2010, at 9:32 AM, Saboor Khan wrote:


Hi,

what is the exact procedure to setup BLF/Speed Dial on 7062- Exp: 7914
Phone, and is it possible i can just enable the softkey Template and BLF
can work? Can someone sent me the exact steps to setup, I have one user
need to monitor some of the phone who are busy/free to direct calls.


Regards,

Saboor
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100826/64160f70/attachment.html>