[cisco-voip] PRI Clocking

Go0se me at go0se.com
Thu Aug 26 11:41:59 EDT 2010


You should be able to run a loopback diag and a BERT on your equipment to
test the vwic. If it tests ok then escalate. Have them do after hours
intrusive testing if possible.

I'm waiting for cisco to release their new line of VWIC-xTC&S-V2 vwics. They
will be much easier to troubleshoot. (TC&S = Tin Can & String) 

VWIC-TC&S-V2 Troubleshoot guide:
	1) check can
	2) check string

Thanks,

Go0se

My blog:
http://atc.go0se.com

--------------------------------------------
Help Hopegivers International
Feed the orphans of Haiti and India
http://www.hopegivers.org
--------------------------------------------


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
Sent: Thursday, August 26, 2010 10:10 AM
To: Cisco VoIPoE List
Subject: Re: [cisco-voip] PRI Clocking

I'm assuming I didn't screw it up.

network-clock-participate wic 0
network-clock-select 1 T1 0/0/0

Only PRI (and PRI VWIC) on the box.



On Thu, Aug 26, 2010 at 11:00 AM, Go0se <me at go0se.com> wrote:
> You should expect a PRI to ALWAYS ALWAYS ALWAYS run clean. Faxing is 
> especially susceptive to errors/failure across a PRI that has errors. 
> And you should ALWAYS clock off of the TELCO. That is ridiculous that 
> they suggested you provide an internal clock for a PRI. Do you have 
> your network clock participate and network clock select correct?
>
> Thanks,
>
> Go0se
>
> My blog:
> http://atc.go0se.com
>
> --------------------------------------------
> Help Hopegivers International
> Feed the orphans of Haiti and India
> http://www.hopegivers.org
> --------------------------------------------
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
> Sent: Thursday, August 26, 2010 9:41 AM
> To: Cisco VoIPoE List
> Subject: [cisco-voip] PRI Clocking
>
> Just for someone to check my sanity.
> I'm having the standard argument with Telco today  (We don't see 
> anything, it must be your equipment)
>
> I have a PRI that I've had complaints of dropped calls.
>
> I go an check the log on the 2921 router, and see this  (Across 3 
> different dates, just one posted for brevity)
>
> 092856: Jul 30 2010 09:49:36.861 EDT: %MARS_NETCLK-3-HOLDOVER:
> Entering Holdover for Controller T1 0/0/0
> 092857: Jul 30 2010 09:49:38.613 EDT: %LINK-3-UPDOWN: Interface 
> Serial0/0/0:23, changed state to down
> 092858: Jul 30 2010 09:49:47.113 EDT: %MARS_NETCLK-3-HOLDOVER_TRANS:
> Holdover timer exceeded for Controller T1 0/0/0
> 092859: Jul 30 2010 09:49:47.113 EDT: %MARS_NETCLK-3-CLK_TRANS:
> Network clock source transitioned from priority 1 to priority 10
> 092861: Jul 30 2010 09:57:23.612 EDT: %LINK-3-UPDOWN: Interface 
> Serial0/0/0:23, changed state to up
> 092863: Jul 30 2010 09:57:32.112 EDT: %MARS_NETCLK-3-CLK_TRANS:
> Network clock source transitioned from priority 10 to priority 1
>
> I also have CRC's on the serial0/0/0:23  (not a whole lot, just some)
>
> Telco of course says they've pulled PM's and see nothing. I've been 
> pushing the issue with my Telco Rep, and he's suggested that since it 
> seems to be a clocking issue (His words) that maybe we should set our 
> PRI to internal clocking.
>
> I reset the counters on my serial interface, and in the past 2 days, 
> I've recieved 1 CRC.  I've also not had the PRI drop any calls. (Or 
> the whole PRI drop, which is what I assume from those log messages)
>
>
> I have another circuit at a different site, I reset it's counters at 
> the same time 48 hours ago, and It had this today (also I don't have 
> any reports of dropped calls, just problems faxing)..
> 12 runts, 0 giants, 0 throttles
> 32 input errors, 32 CRC, 0 frame, 0 overrun, 0 ignored, 2 abort
>
> My question is this:
>
> Is it Normal to have some number of CRC's on a PRI?
> My personal experience is to ALWAY clock off Telco, and you should not 
> have any errors on my lines.  Am I wrong with this assumption?
>
> Mike
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list