[cisco-voip] CUCM 7.1 - adding IP Phone device

[Ryan Ratliff]

Does it show the phone as registered?  The CCMAdmin IP address will be the last IP address CUCM saw that phone registered with.   You'll need to look at a packet capture and ccm traces to see why the phone isn't registering. 

Are there other phones registered from that subnet?

-Ryan

On Aug 27, 2010, at 6:46 AM, ATKSI wrote:

I am moving an IP Phone from one subnet/user to a different user on a different subnet.
I have deleted the IP Phone configuration in call manager; however, when adding the same device (same MAC address) again in the call manager, the call manager associates the phone with the old IPv4 address (even though the phone is turned off).  The phone is booting up and getting a different IP address on the new subnet, and is always in the “Registering” state.  The phone has the right CM IP, TFTP IP, etc. the only difference is the phone IP address and the IP address that the CM is showing in the phone device configuration.  I also tried resetting/rebooting the IP phone.
In general where does the CM get the device IP address from?
Thanks,
George.
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100827/77390c48/attachment.html>