[cisco-voip] Cisco Phone Designer port numbers used??

[Erick B.]

Hey Daniel,

Thanks, that did the trick!

On Thu, Aug 26, 2010 at 8:15 PM, Daniel <dan.voip at danofive.id.au> wrote:
> Hi Erick,
> Make sure you have web access enabled on the phone your're trying to push
> the content too.
> Test this by trying to browse to the ip address of the phone, if you can't
> then go into the phone config and enable it.
> cheers,
> Daniel
>
>
> On Fri, Aug 27, 2010 at 6:18 AM, Erick B. <erickbee at gmail.com> wrote:
>>
>> Does anyone know if Phone Designer needs any certain ports opened to
>> push a wallpaper / ringtone to a 9971 SIP phone?
>>
>> I can load up phone designer and have personalization enabled on my
>> phone, but when I go to apply the wallpaper or ringtone change to the
>> phone it tries for a second and saids Communication failure and there
>> isn't anything blocking traffic between the network the phone is on
>> and my PC or the call manager.
>>
>>
>> Thanks,
>> Erick
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>