[cisco-voip] voice port for paging system

[Eric Butcher]

Sure your paging system works with station ports?

If so, you've got everything.  If it requires a special "page port" or something else, you'll need a paging adaptor and an FXO port instead of the FXS.


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
* 317.569.4282 - IP Phone
* 765.744.1458 - Mobile
* eric.butcher at cdw.com<mailto:eric.butcher at cdw.com>
http://www.cdw.com/


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Knapp
Sent: Tuesday, August 31, 2010 8:35 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] voice port for paging system

Theres the situation,
h.323 gateway 2821
I need to configure 4 voice ports 3 fxo, 1 fxs (paging)

The 3 fxo
My plan:
Added dial peers to point to each voice port
Add no register e.164, avoid gatekeeper registration

The FXS
Route patter --> route list --> route group --> gateway --> dial peer pointing to voice port

Did I miss anything, first time doing this...

Thanks,

Robert Knapp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100901/baf31970/attachment.html>