[cisco-voip] installing 7940/60 firmware v8.1(2) on CUCM v7...

[Lelio Fulgenzi]

My 7940/60s are not upgrading to v8.1(2). Reading the release notes, it says I have to upgrade to v8.1(1) first, but a note from Ryan mentioned upgrading to 8.0(6) first. Just wondering what the dealio is. 



You need to be on sccp 8.0 (6) firmware or later before you can upgrade to 8.1(2) 


on the 7940 /60 phones. This is very similar to the issues upgrading to 8.5(2) 
and later on the third-gen phones. 

I don't know what SIP firmware (if any) would allow an upgrade to 8.1(2). 

-Ryan 

Also, the release notes say I have to install the file on each subscriber now? It's not just the TFTP server anymore? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101203/27aead71/attachment.html>