[cisco-voip] UCC Express Virtual server install

[Jason Aarons (US)]

While it was unsupported you could make it work back in the CRS 4x-7x days. Haven't looked at 8x.

I would check out Voip Integrations product  http://www.voipintegration.com/Software-Tool-For-Automated-Provisioning-System.aspx which they said even runs on Windows for Workgroups 3.11 and takes 5 minutes to setup.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Haas, Neal
Sent: Friday, December 03, 2010 2:27 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] UCC Express Virtual server install

I have the Cisco Unified Contact center Express / IP IVR, does anyone know if I can install this on a Virtual server. I just want to install it to do the TAPS server. This would be for a short period of time when we install a bunch of phones.

Also this is a 5 seat license, is that good enough for the TAPS?

Thanks

Neal



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101203/c2cc863b/attachment.html>