[cisco-voip] Rebuild UNITY Bootsector

[Jason Aarons (US)]

My experience is more like 1 day...about 5% of the time I get a response in 1 hour.

Call TAC and escalate, ask for a live handoff, they can get someone on the phone.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Go0se
Sent: Monday, December 06, 2010 5:37 PM
To: 'David Zhars'; 'Norton, Mike'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Rebuild UNITY Bootsector

I really wonder if something's up with licensing... I opened a TAC case with licensing almost 4 hours ago - still shows a status of "Not Yet Assigned".
So much for their "someone will call you back within an hour" promise.

Thanks,

Go0se

My blog:
http://atc.go0se.com

--------------------------------------------
Help Hopegivers International
Feed the orphans of Haiti and India
http://www.hopegivers.org
--------------------------------------------

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Zhars
Sent: Monday, December 06, 2010 3:24 PM
To: Norton, Mike
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Rebuild UNITY Bootsector

Def bad hard drive...ca ca!  Now onto the nasty and troublesome ordeal of "recover my data from my hard drive that is making clicking noises".....

And we were due to upg Unity in 2 weeks...now it's going to be so ugly....

Kind of funny though, on the phone with TAC, and he can't transfer me because everytime he calls someone in the licensing group, all he's getting is dead air.  Probably another dead phone system.

On 12/6/10, Norton, Mike <mikenorton at pwsd76.ab.ca> wrote:
> You almost certainly need to "F6" and give Windows Setup a floppy with 
> the SATA controller driver. Without a driver for the disk controller, 
> it's not going to see any disks. It's unlikely that Windows 2000 has a 
> built-in driver for your SATA controller (did SATA even exist that 
> long
ago?).
>
> --
> Mike Norton
> I.T. Support
> Peace Wapiti School Division No. 76
> Helpdesk: 780-831-3080
> Direct: 780-831-3076
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Zhars
> Sent: Monday, December 06, 2010 9:56 AM
> To: ROZA, Ariel
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Rebuild UNITY Bootsector
>
> unfortunately with win2k disk and option to repar, i get
> (paraphrasing) "no hard drives were found in this system".  the disk 
> is found in BIOS and at bootup.
> On Mon, Dec 6, 2010 at 10:37 AM, ROZA, Ariel 
> <Ariel.ROZA at la.logicalis.com<mailto:Ariel.ROZA at la.logicalis.com>> wrote:
> The bootsector can be repaired using  the operating system disk 
> (w2k/w3k disk from Microsoft), running the setup program and choosing 
> the option to do a Repair (instead of a new installation). In the 
> Rapir menu there is an option to repair the boot environment.
>
> Ariel.
>
> From:
> cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.neth
> er.net>
> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at p
> uck.nether.net>]
> On Behalf Of John Huston
> Sent: lunes, 06 de diciembre de 2010 12:50 p.m.
> To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
>
> Subject: Re: [cisco-voip] Rebuild UNITY Bootsector
>
> Have you thought about a utility that will check the MBR?
>
> ________________________________
> From: Erick B. <erickbee at gmail.com<mailto:erickbee at gmail.com>>
> To: David Zhars <dzhars at gmail.com<mailto:dzhars at gmail.com>>
> Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> Sent: Mon, December 6, 2010 10:39:28 AM
> Subject: Re: [cisco-voip] Rebuild UNITY Bootsector
>
> In past, I've gotten 2 systems back up with the win2k (once with the 
> WinXP CD) recovery console and the chkdsk option... like the BSOD 
> message saids to try to do.
>
> However, there were 2-3 systems I could not get the chkdsk, and other 
> stuff to fix it and a rebuild was needed then restore from backup 
> (hopefully you have one).
>
> Erick
>
> On Mon, Dec 6, 2010 at 8:11 AM, David Zhars 
> <dzhars at gmail.com<mailto:dzhars at gmail.com>> wrote:
>> My Unity is down!  4.1.x (I know!  We're upgrading in about 2 weeks, 
>> doesn't help me now).
>>
>> Unity won't boot.  Initially it would not see the HD (single SATA HD 
>> on this unit). Now it sees the HD, but says it can't find an OS.
>> This sounds suspiciously like a bad BOOT.INI file....(Windows 2000 is 
>> Unity 4.x for those of us unfortunate enough to still be on it).
>>
>> Anyone ever had to do this?  Can I take a generic Win2K disc, boot 
>> up, and use FIXBOOT?
>>
>> Thanks for helping!
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.