[cisco-voip] factory resetting a 7942 - stuck on "upgrading"

[mark.f.bunch]

I suggest things to look at are:
- ip helper-address
- DHCP scope
- phone firmware

Kind Regards,
Mark

On 08/12/2010, at 2:40 AM, Gregory Wenzel <gwenzit at gmail.com> wrote:

> I have a 7961G-GE stuck in this state, Just installed latest version of CUCM 8.0.3a. its using 9.1.2 code I think was what I upgraded to.
> 
> On Tue, Nov 23, 2010 at 10:30 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> I tried to factory reset a 7942 and it is now stuck on upgrading.
> 
> <7942.jpg>
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it. 
>                               - LFJ (with apologies to Mr. Popeil)
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101209/ecbe9f71/attachment.html>