[cisco-voip] Mobile Connect (Single Number Reach)

[Jason Aarons (US)]

You just can't hire two employees that are married and expect both to setup SNR to their home phone, they will need to get separate his/her phone numbers :)  I didn't find a workaround for this.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
Sent: Thursday, December 09, 2010 3:09 PM
To: Cisco VoIPoE List
Subject: [cisco-voip] Mobile Connect (Single Number Reach)

I have a request to do Single Number Reach, but on a weird schedule.
7am-9am, and 6pm-10pm

I tried to setup two remote destinations for one profile, but the system balked, telling the destination number had already been used (Was duplicate)


Is there some elegant way to pull this off?   I'm sure I could do it
with a translation pattern, which is fine for a one off.  But I see this request becoming common, and would rather not have to make this a manual process of them calling me to set this up.

Mike
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.