[cisco-voip] Mobile Connect (Single Number Reach)

[Mike Lydick]

Just a thought, Time of day, activated partitions/translation that translate
the to the destination number. Place the translation into the Remote
destination CSS. Never tried but it might work if I understand the scenerio.


Best Regards,

Mike Lydick




On Thu, Dec 9, 2010 at 4:01 PM, Mike King <me at mpking.com> wrote:

> On Thu, Dec 9, 2010 at 3:55 PM, Nate VanMaren <VanMarenNP at ldschurch.org>
> wrote:
> > Mike,
> >
> > The rule is exact match causes the problem.  So we have our system setup
> to route the call properly regardless of the way the user dials it, so
> 918015551212 and 98015551212 call the same way.
> >
> > Also to match inbound anchoring you do it like 8015551212 if that is the
> caller id you get from the carrier.  It seems to use application dial rules
> to route the call.
> >
> > That is a few options.
> >
> > -Nate
> >
>
> That is so cool.  Unfortunately, "De De DA To complete calls beyond
> your calling area, you must dial a 1......."
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101209/c2cb9b05/attachment.html>