[cisco-voip] CM/Ucxn 8.5 iso.. not bootable?

[Ryan Ratliff]

Bootables posted to cisco.com were a short lived success (IMO).  Unfortunately licensing issues cropped up that prevented us posting them going forward.

Thanks for pointing out the issue with the release notes.

-Ryan

On Dec 13, 2010, at 9:47 AM, Ed Leatherman wrote:

I thought the iso's from cisco.com were going back to being bootable again?

Contradictory release notes:

Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available
for download from Cisco.com is a bootable image that can be burned to
DVD and used for both upgrades and fresh installs.

Further down in the upgrade procedure:
Note Because the UCSInstall_UCOS_8.5.1.10000-26 build specifies a
nonbootable ISO, the build proves useful only for upgrades. You cannot
use this build for new installations.


I can't boot from the download, going to try to install 8.0 and
upgrade instead assuming the demo license allows that. In-place
upgrade during the 8.0 install wouldn't work either, although I
remember some discussion that that would be the case going forward.

OR i have a bad iso, but the MD5 checked out OK.



-- 
Ed Leatherman
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101213/e79960b0/attachment.html>