[cisco-voip] CP-6911 and Voice Vlan

Max Pierson nmaxpierson at gmail.com
Thu Dec 16 13:17:48 EST 2010

Depends on what kind of switch you're using. On an HP Procurve, all you have
to do is 'tag' the port, otherwise known as trunking in Ciscoland and also
use the 'voice' keyword. The Procurve supports LLDP and so does your IP

2610(config)# vlan 1 name data
2610(config)# vlan 1 untagged 1-24
2610(config)# vlan 10 name voip
2610(config)# vlan 10 tagged 1-24
2610(config)# vlan 10 voice

As stated before, really depends on your vendor...


On Thu, Dec 16, 2010 at 12:04 PM, Antonio Soares <amsoares at netcabo.pt>wrote:

> Hello group,
> Suppose you have CP-6911 Phones and you don't have Cisco Switches. How do
> you configure the Voice Vlan ?
> These Phones don't have a screen and the integrated IVR only allows you to
> configure the basic network settings.
> Thanks.
> Regards,
> Antonio Soares, CCIE #18473 (R&S/SP)
> amsoares at netcabo.pt
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101216/db73f8df/attachment.html>

More information about the cisco-voip mailing list