[cisco-voip] bulk admin - changing common device profile to <None> (CUCM v7)

[Nate VanMaren]

BAT is better in the linux versions with scheduling, etc.

I’d suggest not setting the common device profile to none though, set it to a profile with nothing set in it.  There is lots of stuff that used to be in the device pool that is now in that common device profile.  (I think MOH, etc)

But BAT is fairly fast, and the report will show in process or complete.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, December 21, 2010 2:09 PM
To: voyp list
Subject: [cisco-voip] bulk admin - changing common device profile to <None> (CUCM v7)

I'd like to use the bulk admin tool to modify the common device profile to <none>.

I recall a post saying this would take a while....I can't find the post. Any recollection as to how long it would take to modify close to 9,000 items and whether there is something we can do to make this go a bit faster? Will the report tell me when the administration change was complete?



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101221/2b6aa306/attachment.html>