[cisco-voip] 7936 rebooting on 6500 Sup2 w/ IOS

Leslie Meade lmeade at signal.ca
Tue Dec 28 23:44:14 EST 2010


Have you got too many on the blade ?

Ie are they drawing too much power ?

I have the same issue and had to put bricks on them to get them to work

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of george.hendrix at l-3com.com
Sent: Tuesday, December 28, 2010 4:32 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7936 rebooting on 6500 Sup2 w/ IOS

 

Hi,

 

  I have a few 7936 phones connected to a 6500 w/ Sup2 running IOS 12.2(SXD7B) and line cards WS-X6148-RJ45V.  For some reason the phones keep rebooting and will not work.  I have some 6500s with CatOS with the same line cards that work just fine.  Does anyone know a work around or what the problem could be?  Of course, I could run CatOS but we don’t want to change these to CatOS.

 

Thanks

 

Bill Hendrix 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101228/8a9512bb/attachment.html>


More information about the cisco-voip mailing list